Hi there,

Does anyone could help me? The player won't start, the Display stays blank and the Standby LED dims up and down.

here is the stuff from hyperterminal :


empeg-car bootstrap v1.02 20001106 ([email protected])12cc6c00


Funct
empeg re
If there is anyone present who wants to upgrade the flash, let them speak now, 0000000ceg usb initialised, PDIUSBD12 id 1012t [<40002bf8>] from [<4000e320>]
or forever hold their peace...it seems not. Let fly the Penguins of Linux!0000BC r8 = 000005C4 r7 = 4001E3B8
r10 = 00000000 r9 =
init

e000 v1.04violation
Copying kernel...lr=0x4000b738 (ba
Calling linux kernel...15
r6 = 0000
Uncompressing Linux..................................... done, booting the kerne8 r9 = 00013878 r8ion at
r10 = 4001D858 r9 = 0001
Function entered at [<4=
l.00
Linux version 2.2.14-rmk5-np17-empeg49 ([email protected]) (gcc versi : [<4000b738>]4 = 4001E16050>] lr : [<4000b738>]
r6 = 00000002400
Function
on 2.95.3 20010315 (release)) #130 Mon Oct 22 18:52:07 BST 200101e070 fp : bffffa68
r10 = 4001D858 r5 = 00000000 r4
Processor: Intel StrongARM-1a
NET4: Linux TCP/IP 1.0 for NET4.00000 r9 = 00000000 r8 = 0000000
IP Protocols: ICMP, UDP, TCP r9 = 0
Function entered at
TCP: Hash tables configured (ehash 16384 bhash 16384)R_32 Segment user8>]
r6
r10 = 4001D858 r9 = 0000
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)r5 =
Function ente
Function entered at [<
Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 )r10 = 4001D858 r5 = 0
Function entered at [
init(1): memory viol
ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 )8 = BFFFFEFtered at [<4000a7 = 4001E3B8 : 000
r10 = 00000000 r9 = 00000000 r
Starting kswapd v 1.598>]20001E43C r5 = 4
SA1100 serial driver version 4.27 with no serial options enabled
Function enter
r10 = 4001D858 r9 = 00000002aa4>]7D Table: C
empeg state support initialised 0089/88c1 (save to d0004400).
empeg RDS driver initialised
empeg power-pic driver initialised (first boot)
RAM disk driver initialized: 16 RAM disks of 4096K size
empeg single channel IDE
Probing primary interface...
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: TOSHIBA MK4018GAS, ATA DISK drive
hda: TOSHIBA MK4018GAS, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: TOSHIBA MK4018GAS, 38154MB w/0kB Cache, CHS=4864/255/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:18:04:2
0
Partition check:
hda:hda: status timeout: status=0x84 { Busy }
hda: drive not ready for command

-----

seems that there is some problem on communication between player and hdisk...

kind regards from berlin/germany

Dave