jupiter bootstrap v0.11 20010807 If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.02 Copying kernel... Copying ramdisk... Calling linux kernel... Linux version 2.4.4-rmk1-empeg9 (mac@aphex.internal.empeg.com) (gcc version 2.95.3 20010315 (release)) #317 Tue Aug 7 19:30:42 BST 2001 Processor: Intel StrongARM-1110 revision 9 Architecture: Rio Jupiter Warning: bad configuration page, trying to continue On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: keepinitrd root=/dev/hda5 Console: colour dummy device 80x30 Calibrating delay loop... 194.15 BogoMIPS Memory: 16MB = 16MB total Memory: 14292KB available (1408K code, 294K data, 72K init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 Starting kswapd v1.8 i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-core.o: driver i2c-dev dummy driver registered. i2c-algo-bit.o: i2c bit algorithm module i2c-jupiter.o: internal jupiter i2c driver i2c-dev.o: Registered 'Jupiter internal i2c bus driver' as minor 0 i2c-core.o: adapter Jupiter internal i2c bus driver registered as adapter 0. sa1100fb_init Console: switching to colour frame buffer device 60x20 i2c-core.o: driver Jupiter display settings registered. i2c-core.o: client [display settings] registered to adapter [Jupiter internal i2c bus driver](pos. 0). Failed to set display settings. i2c-core.o: client [display settings] unregistered. block: queued sectors max/low 9312kB/3104kB, 64 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Waiting for drive ready...not yet ready, probing anyway Probing IDE bus... hdb: CD-W58E, ATAPI CD/DVD-ROM drive hdb: CD-W58E, ATAPI CD/DVD-ROM drive hdb: CD-W58E, ATAPI CD/DVD-ROM drive hda: ST3300631A, ATA DISK drive hdb: CD-W58E, ATAPI CD/DVD-ROM drive ide0 at 0xf7000000-0xf7000007,0xf7000038 on irq 6 hda: 268435455 sectors (137439 MB) w/16384KiB Cache, CHS=266305/16/63 Partition check: hda: [PTBL] [16709/255/63] hda1 hda2 < hda5 > RAMDISK: Compressed image found at block 0 SA1100 serial driver version 1.3 ttySA0 on SA1100 UART3 (irq 17) ttySA1 on SA1100 UART1 (irq 15) ttySA2: unsupported device infra-red support initialised. empeg button support initialised. empeg /proc files initialised. newk (NewKernel) version 0.03 jupiter fan driver version 0.02 jupiter led driver version 0.02 <6>PPP generic driver version 2.4.1 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices Vendor: TEAC Model: CD-W58E Rev: 1.0A Type: CD-ROM ANSI SCSI revision: 02 Detected scsi CD-ROM sr0 at scsi0, channel 0, id 0, lun 0 sr0: scsi3-mmc drive: 32x/32x writer cd/rw xa/form2 cdda tray Uniform CD-ROM driver Revision: 3.12 Registering mixer yielded: 0 sa1100_dac initialized usb.c: registered new driver usbdevfs usb.c: registered new driver hub NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (ext2 filesystem). empeg-pump v0.04 (20001108) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=3 Trying to unmount old root ... okay Freeing init memory: 72K Double-booting... newk: Rebooting with new kernel Uncompressing Linux................................................................ done, booting the kernel. stuLinux version 2.4.13-ac8-rmk1-empeg15 (root@central) (gcc version 2.95.2 20000220 (Debian GNU/Linux)) #10 Sun Mar 12 20:13:46 CST 2006 Processor: Intel StrongARM-1110 revision 9 Architecture: Rio Jupiter Converting old-style param struct to taglist Warning: bad configuration page, trying to continue On node 0 totalpages: 4096 zone(0): 4096 pages. zone(1): 0 pages. zone(2): 0 pages. Kernel command line: noinitrd root=/dev/hda5 init=/sbin/son-of-init Relocating machine vectors to 0xffff0000 Warning: uninitialized Real Time Clock Calibrating delay loop... 137.21 BogoMIPS Memory: 16MB = 16MB total Memory: 13960KB available (1749K code, 305K data, 60K init) Dentry-cache hash table entries: 2048 (order: 2, 16384 bytes) Inode-cache hash table entries: 1024 (order: 1, 8192 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) Buffer-cache hash table entries: 1024 (order: 0, 4096 bytes) Page-cache hash table entries: 4096 (order: 2, 16384 bytes) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.4 Based upon Swansea University Computer Society NET3.039 SA1100 USB Controller Core Initialized get_random_bytes called before random driver initialization usbctl: Opened for usb-eth usbctl: Started for usb-eth USB Function Character Driver Interface - 0.4, (C) 2001, Extenex Corp. Starting kswapd v1.8 Journalled Block Device driver loaded devfs: v0.119 (20011009) Richard Gooch (rgooch@atnf.csiro.au) devfs: boot_options: 0x1 i2c-core.o: i2c core module i2c-dev.o: i2c /dev entries driver module i2c-algo-bit.o: i2c bit algorithm module wvi2c-jupiter.o: internal jupiter i2c driver i2c-dev.o: Registered 'Jupiter internal i2c bus driver' as minor 0 empeg /proc files initialised. newk (NewKernel) version 0.04 USB slave initialised, ISP1161/1181 DC id 6120 empeg_isp1161 USB slave driver. block: queued sectors max/low 9093kB/3031kB, 64 slots per queue RAMDISK driver initialized: 16 RAM disks of 4096K size 1024 blocksize Uniform Multi-Platform E-IDE driver Revision: 6.31 ide: Assuming 50MHz system bus speed for PIO modes; override with idebus=xx Waiting for drive ready...ok Probing IDE bus... hda: ST3300631A, ATA DISK drive hdb: CD-W58E, ATAPI CD/DVD-ROM drive ide0 at 0xf7000000-0xf7000007,0xf7000038 on irq 6 hda: 586072368 sectors (300069 MB) w/16384KiB Cache, CHS=581421/255/63 hdb: ATAPI 32X CD-ROM CD-R/RW drive, 1280kB Cache cdrom: entering register_cdrom Uniform CD-ROM driver Revision: 3.12 cdrom_init finishes cdrom: drive "/dev/hdb" registered Partition check: /dev/ide/host0/bus0/target0/lun0: p1 p2 < p5 p6 p7 p8 > loop: loaded (max 8 devices) PPP generic driver version 2.4.1 SCSI subsystem driver Revision: 1.00 scsi0 : SCSI host adapter emulation for IDE ATAPI devices sa1100_dac: request_irq failed: -16 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP IP: routing cache hash table of 512 buckets, 4Kbytes TCP: Hash tables configured (established 1024 bind 1024) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. NetWinder Floating Point Emulator V0.95 (c) 1998-1999 Rebel.com VFS: Mounted root (ext2 filesystem) readonly. Mounted devfs on /dev Freeing init memory: 60K I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda1 as reiserfs but got error 2 No primary hard disk Remounting first music partition read-only No primary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player E !! player_config.cpp 23: Failed to open configuration file :-( 0xc0041002 Permanent section: 0x0x22d6248..0x0x22d7324 (mlocking 8K) E !! usbmap.cpp 65: Failed to open usb map file: errno = 2 E !! i2c_device.cpp 29: Failed to open /dev/i2c-0, errno=2 E !! offset_time.cpp 37: Failed to open RTC: 0xc0041002 E !! standby_led.cpp 13: Unable to open LED device. E !! ../lib/ui/display_fb.cpp 40:player: unhandled page fault at pc=0x400c9660, lr=0x021656ac (bad address=0x00000000, code -1) Failed tFunction entered at [<0216568c>] from [<02144d50>] o turn of r4 = 023B9524 f cursor or blankiFunction entered at [<021449b0>] from [<020c4e14>] ng intervFunction entered at [<020c4d18>] from [<020c782c>] al. E !! r6 = 00000000 ../lib/u r5 = 0000001E i/display r4 = BFFFFD38 _fb.cpp 89: FaileFunction entered at [<020c75b8>] from [<020c79e8>] d to openFunction entered at [<020c7954>] from [<4008ceb4>] display Function entered at [<4008cd48>] from [<02005284>] device /dRestored terminal settings Remounting first music partition read-only No primary hard disk Abnormal player termination Player received signal 11 Starting player E !! player_config.cpp 23: Failed to open configuration file :-( 0xc0041002 Permanent section: 0x0x22d6248..0x0x22d7324 (mlocking 8K) E !! usbmap.cpp 65player: unhandled page fault at pc=0x400c9660, lr=0x021656ac (bad address=0x00000000, code -1) : Failed Function entered at [<0216568c>] from [<02144d50>] to open u r4 = 023B9524 sb map fi le: errnoFunction entered at [<021449b0>] from [<020c4e14>] = 2 E !Function entered at [<020c4d18>] from [<020c782c>] ! i2c_dev r6 = 00000000 ice.cpp r5 = 0000001E 29: F r4 = BFFFFD38 ailed to open /devFunction entered at [<020c75b8>] from [<020c79e8>] /i2c-0, eFunction entered at [<020c7954>] from [<4008ceb4>] rrno=2 EFunction entered at [<4008cd48>] from [<02005284>] !! offseRestored terminal settings Remounting first music partition read-only No primary hard disk Abnormal player termination Player received signal 11