empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kernel. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v425 (hijack@rtr.ca) (gcc version 2.95.3 20010315 (release)) #7 Sun Apr 17 13:30:51 EDT 2005 Processor: Intel StrongARM-1100 revision 11 Checking for extra DRAM: c0c00000: wrote ffffffff, read e91ba9f0 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 60000013) 12MB DRAM Command line: mem=12m Calibrating delay loop... 207.67 BogoMIPS Memory: 10952k/12M available (984k code, 20k reserved, 328k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Found custom animation at offset 0x9bb80 Tuner: loopback=0, ID=0 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0005380). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: FUJITSU MHS2040AT, 38154MB w/2048kB Cache, CHS=4864/255/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:0c:00:0d Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 EXT2-fs: ide0(3,4): couldn't mount because of unsupported optional features. Tried to mount /dev/hda4 as ext2 but got error 22 Error mounting partitions (possibly already mounted) Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Press 'q' now to go into development mode. You Have Zero Seconds To ComplůStarting player Timezone: US/Pacific player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000 Restored terminal settings Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Abnormal player termination Player received SIGINT, user interruption Switching to shell-player loop Starting bash. empeg:/empeg/bin# ls -al total 1332 drwxr-xr-x 2 0 0 1024 Apr 1 2003 . drwxr-xr-x 4 0 0 1024 Apr 1 2003 .. -rwxr-xr-x 1 0 0 1171 Apr 1 2003 d -rwxr-xr-x 1 0 0 117 Apr 1 2003 g -rwxr-xr-x 1 0 0 1350748 Apr 1 2003 player empeg:/empeg/bin# cd / empeg:/# ls 0al   -al total 25 drwxr-xr-x 15 505 220 1024 Apr 1 2003 . drwxr-xr-x 15 505 220 1024 Apr 1 2003 .. drwxr-xr-x 2 0 0 1024 Apr 1 2003 bin drwxr-xr-x 2 0 0 1024 Jul 4 2000 dev drwxr-xr-x 2 0 0 1024 Jul 6 1999 drive0 drwxr-xr-x 2 0 0 1024 Jun 2 1999 drive1 drwxr-xr-x 4 0 0 1024 Apr 1 2003 empeg drwxr-xr-x 3 0 0 1024 Sep 15 1999 etc drwxr-xr-x 2 0 0 1024 Feb 9 2000 lib drwx------ 2 0 0 12288 Apr 1 2003 lost+found drwxr-xr-x 2 0 0 1024 Jun 2 1999 mnt dr-xr-xr-x 21 0 0 0 Nov 28 09:03 proc lrwxrwxrwx 1 0 0 3 Apr 1 2003 sbin -> bin lrwxrwxrwx 1 0 0 10 Apr 1 2003 swapfile -> ./dev/hda6 drwxr-xr-x 2 0 0 1024 Apr 13 1999 tmp drwxr-xr-x 4 0 0 1024 Feb 6 2000 usr drwxr-xr-x 3 0 0 1024 Aug 28 1999 var empeg:/# cd drive0 empeg:/drive0# ls 0al   -al total 2 drwxr-xr-x 2 0 0 1024 Jul 6 1999 . drwxr-xr-x 15 505 220 1024 Apr 1 2003 .. empeg:/drive0# cd .. empeg:/# cd empeg empeg:/empeg# ls 0a  -al total 4 drwxr-xr-x 4 0 0 1024 Apr 1 2003 . drwxr-xr-x 15 505 220 1024 Apr 1 2003 .. drwxr-xr-x 2 0 0 1024 Apr 1 2003 bin lrwxrwxrwx 1 0 220 14 Apr 1 2003 fids0 -> ../drive0/fids lrwxrwxrwx 1 0 220 14 Apr 1 2003 fids1 -> ../drive1/fids drwxr-xr-x 6 0 0 1024 Apr 1 2003 lib lrwxrwxrwx 1 0 220 13 Apr 1 2003 var -> ../drive0/var empeg:/empeg# cd fids0 bash: cd: fids0: No such file or directory empeg:/empeg# cd var bash: cd: var: No such file or directory empeg:/empeg# ro mount: /drive0 not mounted already, or bad option empeg:/empeg# umount dev/hda1 4 umount: dev/hda4: not found empeg:/empeg# swapon /swapfile Adding Swap: 16028k swap-space (priority -1) empeg:/empeg# fsck -fay / Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda5 is mounted. Pass 1: Checking inodes, blocks, and sizes Pass 2: Checking directory structure Pass 3: Checking directory connectivity Pass 4: Checking reference counts Pass 5: Checking group summary information /dev/hda5: 1518/4096 files (0.5% non-contiguous), 9461/16384 blocks empeg:/empeg# fsck -fay /dev/hda4 Parallelizing fsck version 1.19 (13-Jul-2000) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda4 is mounted. fsck.ext2: Filesystem revision too high while trying to open /dev/hda4 The filesystem revision is apparently too high for this version of e2fsck. (Or the filesystem superblock is corrupt) The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 empeg:/empeg# ro mount: /drive0 not mounted already, or bad option empeg:/empeg# rom mount: /drive0 not mounted already, or bad option empeg:/empeg# fsckj .ext2 -fay -b 32768 /dev/hda4 e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/hda4 is mounted. fsck.ext2: Bad magic number in super-block while trying to open /dev/hda4 The superblock could not be read or does not describe a correct ext2 filesystem. If the device is valid and it really contains an ext2 filesystem (and not swap or ufs or something else), then the superblock is corrupt, and you might try running e2fsck with an alternate superblock: e2fsck -b 8193 empeg:/empeg# s swapoff /swapfile empeg:/empeg# sync empeg:/empeg# empeg-car bootstrap v1.00 20000601 (hugo@empeg.com) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux..................................... done, booting the kernel. Linux version 2.2.17-rmk5-np17-empeg52-hijack-v425 (hijack@rtr.ca) (gcc version 2.95.3 20010315 (release)) #7 Sun Apr 17 13:30:51 EDT 2005 Processor: Intel StrongARM-1100 revision 11 Checking for extra DRAM: c0c00000: wrote ffffffff, read e91ba9f0 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 7, serial number 60000013) 12MB DRAM Command line: mem=12m Calibrating delay loop... 207.67 BogoMIPS Memory: 10952k/12M available (984k code, 20k reserved, 328k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Found custom animation at offset 0x9bb80 Tuner: loopback=0, ID=0 Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0005400). empeg RDS driver initialised empeg power-pic driver initialised (first boot) RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive hda: FUJITSU MHS2040AT, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: FUJITSU MHS2040AT, 38154MB w/2048kB Cache, CHS=4864/255/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman (erik@vt.edu) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:0c:00:0d Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... |/-\|/-\|/-\|/-\|/-\done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 EXT2-fs: ide0(3,4): couldn't mount because of unsupported optional features. Tried to mount /dev/hda4 as ext2 but got error 22 Error mounting partitions (possibly already mounted) Remounting first music partition read-only No primary hard disk Remounting second music partition read-only No secondary hard disk Press 'q' Starting player Timezone: US/Pacific player.cpp : 385:empeg-car 2.00 2003/04/01. ! tags.cpp : 61:Failed to open tags (0xc0041002). Prolux 4 empeg car - 2.1434 Mar 26 2003 Vcb: 0x4054d000