IP address

Im trying to put the TTS Clock addon on my player. Im having trouble finding my players IP address. Any help woulb be appreciated. BTW I have it hooked up on USB if that matters

choose "about" from the top level menus and scroll down.

BTW I have it hooked up on USB if that matters

If it's *only* hooked up with USB, then it doesn't have an IP address. You need ethernet for that...

The instructions only metion using an IP address for install. Would there be a way to install using USB

Nope.

On a very loosely related topic... here is my paste from my config.ini file:

[Network]
Gateway=0.0.0.0
Netmask=255.255.255.0
IPAddress=192.168.0.4
DHCP=1

Yet, on a P2P network (notebook to empeg via crossover cable), my empeg always picks its own IP. I know it's failing to get a DHCP signal, but I thought that line in my config where I specify my IP would take over..

I know it's failing to get a DHCP signal, but I thought that line in my config where I specify my IP would take over..

Nope, that's not how it works. All other lines are ignored if DHCP=1. The player is designed to assign itself a UPNP address if you tell it to use DHCP and there isn't a DHCP server.

The instructions only metion using an IP address for install. Would there be a way to install using USB

There is no way to add files to the player using USB, however you can use the serial cable.

By the way, since you seem to be a newbie at this, I want to remind you to use the @DC modifier if you install any programs that run off of the /drive0 or /drive1 partitions. If you fail to do so, your player will be unable to synch because it won't be able to mount the music partitions correctly, as described here.