This AM: Tuner no audio.... Help???

My PCATS tuner has been working great for a few months now. This am, on the way to work, for no apparent reason, the sound just "stopped".

Right in the middle of listening, silence. No seeming effect on the empeg, no errors, nothing. Empeg works fine, player mode works fine. Cant test aux.

I cranked the vol ALL the way up, and when I "scan" (long right button press) the tuner will "scan" to the next station. It seems to be tuning on somethign, because it does stop at the "real" stations in the area. But I get NO audio, and no No visuals.

When I "scan" (or seek, whatever its called) I hear the faintest of faint "clicks" as it passes each frequency. Such that if Im quiet, and its turned ALL the way up and I skip to the next station, while its "scanning" I can hear a faint "riffling a deck of cards sound".

ANY ideas? Im lost without my tuner now. I listen to my NPR and news (Empeg duty for music)...

Jeff

Is there a chance that a wire came loose?

I checked the wires at the loom plug, all look good. I fished out the aux connector as well, and plugged my Sirius into it. AUX works fine. So its the tuner... Next I rip out the whole mess, bring it in the house and test from the AC power supply....

Any advice on how to troubleshoot the tuner is most appreciated! I guess check the power line, LED etc first. After that Im clueless...

Jeff

Quote:
. I fished out the aux connector as well, and plugged my Sirius into it. AUX works fine. So its the tuner

Sorry, but I don't get the same conclusion from "No sound from radio, but Aux-in works".

It could still be a wiring connection between the tuner and the player. Best way to check it is to find a mate with an Empeg, and try your Tuner on her gear.

Cheers