FS aluminium housing

Posted by: coolblue

FS aluminium housing - 19/07/2004 14:49

From a while ago I made five housings .
Expect of the last one, all housings are sold.
For the last one I miss a matching rotary-knob (NewFace Design).

I tried to reorder this knob. But 303 has stopped making Knobs and Faces.
I looked without any success for an other source.

Now I will try to sell the housing without a matching Volume-Knob.





What you will get.

- 3 sets of lenses (red/blue/transparent)
- 2 sets of push-buttons (black/transparent)
- display-cable-extension (transfer-pcb + 1mm pitch ribbon cable extension)
- all mounting stuff
- the housing itselfs.

for 150€ + shipping is all yours.

Restrictions
**************
The Installation is only for "experienced Empeg users".
You have to separate the display-board from the main-unit.
Generally it's a not recommended to remove the display-board from the main-unit.
You are doing that on your own risk.

The IR Input signal strength is absorbed throuh the lenses.
The material thickness of the lenses is greater than the original lenses.
With my universal RC I have no problems to controll my empeg in the whole room. With the original RC
the reception is limited.


Anyone interested?



Andy
Posted by: FireFox31

Re: FS aluminium housing - 20/07/2004 02:14

Andy, did you create Julf's military Land Rover rackmount case? It's really a fine piece of work. If this casing is similar, then I can vouch for the quality!
Posted by: coolblue

Re: FS aluminium housing - 20/07/2004 13:29

Yes,
Julf's 19'' rack-housing for his historical warfare truck is from the same batch.

150€ is a good price.
Just the material-costs were higher.

At the moment I'm cleaning up my old empeg stuff.

I found also an original black empeg bag.
I think there will be some interest on this bag.

Maybe I will sell it together with the housing or I start an ebay auction.

Andy
Posted by: coolblue

Re: FS aluminium housing - 15/08/2004 12:39

still available
I have dropped the price to 120€/150$
Posted by: adavidw

Re: FS aluminium housing - 20/08/2004 14:39

Have you set a price for the bag yet?
Posted by: coolblue

Re: FS aluminium housing - 20/08/2004 18:37

I'm going to sell housing and bag in two separate auctions by ebay.
Have a look there in the next few days.
Posted by: coolblue

FS original black empeg bag on ebay - 22/08/2004 12:03

housing-kit and bag are for sale on ebay

http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...ssPageName=WDVW
http://cgi.ebay.com/ws/eBayISAPI.dll?Vie...ssPageName=WDVW