Posted by: acurasquirrel_
SMD UV LEDs are to be had - 23/10/2002 12:16
I finally found some http://www.sander-electronic.de/be00027.html these would work well in the buttons kit to better illuminate the buttons.
SMD UV LEDs are to be had
Posted by: tfabris
Re: SMD UV LEDs are to be had - 23/10/2002 12:19
What, you mean if you cast the buttons with fluorescent material in the plastic?
Posted by: robricc
Re: SMD UV LEDs are to be had - 23/10/2002 12:20
This was discussed in in the past. I guess nobody tried it yet....
Posted by: acurasquirrel_
Re: SMD UV LEDs are to be had - 23/10/2002 12:22
Yeah I would imagine with the 110 degree viewing angle and the buttons cast with some type of flourescing(sp?) material in the mix should lead to pretty neat looking buttons.
Posted by: acurasquirrel_
Re: SMD UV LEDs are to be had - 23/10/2002 12:25
Well until the became available in SMD you really couldnt pull it off.
Posted by: tfabris
Re: SMD UV LEDs are to be had - 23/10/2002 12:35
Um, keep in mind that the button LED's aren't SMD, only the knob LEDs.
The button LEDs are through-hole, they're just the smaller ones not the larger ones.
The button LEDs are through-hole, they're just the smaller ones not the larger ones.
Posted by: acurasquirrel_
Re: SMD UV LEDs are to be had - 23/10/2002 12:49
Yes Im aware but would it not look odd to have the buttons lit with UV and the knob not? Now with these LEDs you can light up both via UV.