Posted by: michael_corleone
Pump Response Error, Installing 2x20 gigs - 01/04/2005 18:46
So my harddrive died, and i decided to replace it with 2 20 gig hdd's. I downloaded the car2-builder-20011022.upgrade and
i'm getting this error when i run the wizard
Error "Bad Pump response" Occured during stage 0x25
I changed the ide cable just in case. I don't know what else it could be, i'm also refering to the Rio Car Disk Upgrade Guide
on riocar.org same thing happens
any ideas?
Posted by: SonicSnoop
Re: Pump Response Error, Installing 2x20 gigs - 01/04/2005 18:52
You may want to check out this
FAQ entry and see if that helps any
Posted by: michael_corleone
Re: Pump Response Error, Installing 2x20 gigs - 01/04/2005 19:31
from that site I did all that, tried downloading the car2-builder-20011022.upgrade file again, cable works. The Hdd's are brand new right out of the box and out of a laptop..... oh and i tried a new ac adapter from my other empeg. any other ideas
Posted by: michael_corleone
Re: Pump Response Error, Installing 2x20 gigs - 01/04/2005 23:27
Got it it's this problem
http://kharendaen.dyndns.org:8000/~henke/public/mk1214gap/
doesn't like the hdd's, gonna go back to hitachi
Posted by: tfabris
Re: Pump Response Error, Installing 2x20 gigs - 02/04/2005 00:02
I don't think the empeg does CSEL, I don't think it's that problem. The elephant I'm talking about is
this one.
Posted by: michael_corleone
Re: Pump Response Error, Installing 2x20 gigs - 02/04/2005 00:58
No go Tony, I put it into my other empeg that works and still getting the same error. It's the hdd's doesn't like the toshiba hdd's
Posted by: tfabris
Re: Pump Response Error, Installing 2x20 gigs - 02/04/2005 07:28
Are you trying to build each of the two new 20 gig drives individually? (i.e, with only one plugged in)
Posted by: SE_Sport_Driver
Re: Pump Response Error, Installing 2x20 gigs - 02/04/2005 10:58
When you swapped players, did you also swap hard drives?