Posted by: julf
Bigdisk builder gets stuck on "Selecting pump device" on 120G Samsung - 04/04/2007 13:37
Trying to add a 120G disk, I am trying to run the "Mark Lord Special Disk Builder" (builder_bigdisk.upgrade), it gets to "Selecting pump device" but then nothing further happens.
The disk is a 120G Samsung, connected as the main and only disk.
Any hints/suggestions?
Posted by: mlord
Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams - 04/04/2007 13:55
Mmm.. I've never actually used the builders myself, or at least not on any drive over 30GB. They reportedly do work, though. So I wonder what's strange in this case. Master/slave jumper?
Any chance of a serial port capture (log) ?
??
Posted by: julf
Re: Bigdisk builder gets stuck on "Selecting pump device" on 120G Sams - 04/04/2007 15:28
Found the problem - the classic bent IDE header on main board
Guess what I have to do is switch over the display board and the disks from this one to the spare unit (that has a failing rotary encoder). Are the display boards of MK II:s and Rio's interchangeable?
