Posted by: woops
Linksys BEFSX41: Force Port 4 to 10Mbps? - 14/03/2008 11:27
Anyone know how to force a Linksys BEFSX41 router to switch to 10Mbps?
Thanks
Thanks
Linksys BEFSX41: Force Port 4 to 10Mbps?
Posted by: tfabris
Re: Linksys BEFSX41: Force Port 4 to 10Mbps? - 14/03/2008 13:53
By daisy chaining an old 10mbps hub into it?
Posted by: woops
Re: Linksys BEFSX41: Force Port 4 to 10Mbps? - 14/03/2008 15:33
Thanks Tony. What a great board this is.
Using vista x64, I finally moved the empeg off the router and hooked it directly into the second nic. I made the nick half duplex 10mbps with address 192.168.1.x mask 255.255.255.0 with no gateway and the empeg 192.168.1.y same mask no gateway.
I've never had the empeg run so well. Both 40gb and 60gb were prepared as though they were 120gb + size.
What a frustration it has been, though for now i am extremely happy!
Using vista x64, I finally moved the empeg off the router and hooked it directly into the second nic. I made the nick half duplex 10mbps with address 192.168.1.x mask 255.255.255.0 with no gateway and the empeg 192.168.1.y same mask no gateway.
I've never had the empeg run so well. Both 40gb and 60gb were prepared as though they were 120gb + size.
What a frustration it has been, though for now i am extremely happy!