Pump command syntax?

Hi,

Does anyone know where empeg-pump is documented? I'd really like to figure out how to "pump" a system manually. This way, I can install an upgrade image by allowing it to flash the unit, then when it (most of the time now) fails to pump on reboot, I can simply retry this manually. The unit is otherwise fine once actually "pumped" (partitions created, etc.).

Jon.

A duplicate (more or less) of your other threads.

Use my Linux/Mac/Windoze/whatever upgrader.c utility if possible. Faster, and the source code shows how to "pump" partitions from a .upgrade file.

When pumping an existing, parititioned drive, "pump" merely consists of FTPing a new filesystem image directly onto the raw device (eg. cat newimage > /dev/hda? via FTP).

Cheers

So I like starting threads or something Just trying to catch up on years of activity in one weekend. Anyway, I read through your code (figured you'd based it on that older analysis of the format itself) so I think I can manually pump a disk now. Which is good, and if this works we could replace pumping with a simple shell script running on a Linux host.

That disk I bought started getting IRQ errors, I'm hoping it was just a faulty 120GB disk. Just for kicks, I exchanged it for a larger 250GB disk just now...which will be more fun preparing.

Jon.

Interesting how the 250GB WD disk I just replaced the 120GB (same model series) OEM disk with is pumping first time on the bigdisk images. Perhaps it was just a faulty disk that had been sitting on the store shelf too long...weird because it was working fine with a USB<->IDE adapter. Next time I'll run bonie++ before blaming the empeg. Of course, I don't know for sure this is going to work, but I'm already a lot more confident about it

Disk I installed: WD250BEVE. ($89.99 in Microcenter as of today - brand new offer just started)
Disk that needed exchanging: WD120BEVE (was $59.99 in Microcenter the other day).

Both run at 550mA max current draw, 5V. And the power supply I have is rated up to 1A, 12V. Beyond that I'm done double guessing what the heck was wrong with that other "OEM" disk I bought.

Jon.

Told ya so.

Well, having said that, the player software failed to pump. But the disk in general isn't generating those tell tail "attempt to access beyond end of device" errors. I manually pumped the player software onto the 5th partition by taking the disk out.

Why I need 250GB is beyond me, guess that's a lot of NPR Podcasts!

Heh.. flac ? (but then the disk never spins down, and can overheat as a result)