Hijack with FAT support and the DSP mod for S/PDIF

Hi,

I've compiled the new Hijack kernels with the extra bits people wanted. Usual place

v2.00b11 with Hijack v273 and FAT support is here
v2.00b11 with Hijack v273 and the DSP modifications needed for the S/PDIF board is here

- Trevor

Sheeesh. Out of date already!

Argh. You work too quickly!

Okay. Second time lucky!

Hijack v274 with FAT support
Hijack v274 with DSP mod

- Trevor

v278 for all those interested...

Hijack v278 with FAT support
Hijack v278 with DSP mod

- Trevor

v280 is at the usual place here. I also fixed the dodgy PHP which was making the page appear blank... Oops.

Hijack v280 with FAT support
Hijack v280 with DSP mod

- Trevor

Does your mod also have the beep fix? What does this DSP mod do? I'd just try it, but it requires a serial port to install if I remember correctly, and I don't have access to one at the moment.

Thanks,

Stu

The DSP mod is the fix for the beeps. That's it.
If you've got Hijack already installed then you can FTP it over but otherwise yes, you do need the serial port to upgrade it.

- Trevor

Thanks. I guess I was confusing it for a subwoofer out mod. I personally don't need or want a sub out board, but it has been brought to my attention that others do. Any thoughts on how to mod the kernel to enable the DSP's sub out?

Stu

I should really name it better next time. It's basically the v2.00b11 empeg kernel with Hijack v280 and the changes in the DSP initialisation that reenables the beeps. The kernel with FAT support actually has the DSP changes as well.

As for the subwoofer, I'll have a look at the manual for the DSP tonight when I get home. It shouldn't be too hard (famous last words... )

- Trevor

u know tman, with a glass of wine and a back rub, you can probably talk mark into implating the code.

I've put the kernels with mods for v2.00b13 with Hijack v281 at usual place

Kernel with DSP changes for S/PDIF here
Kernel with FAT support here

There is no harm in using either kernel with a stock player.

Enjoy

- Trevor

Argh. Mark's done it again! I get a new version up and he supercedes it

Usual place

Kernel with DSP changes for S/PDIF here
Kernel with FAT support here

- Trevor

Can you send me a patchfile showing your diff's from stock Hijack?

Thanks

Sure. The patch needed for the S/PDIF board is attached to this message. It just changes the initialisation of one of the DSP registers. I've not noticed any problems with running it on a stock player as well so it should be safe.

- Trevor

Usual place for v283

Kernel with DSP changes for S/PDIF here
Kernel with FAT support here

- Trevor

Okay, this patch (which did not apply cleanly for me, but I managed to do it by hand) will be in Hijack v284.

-ml

Oops. I've moved some stuff around and must have a slightly different kernel tree than you. It's basically changing the OutSwi lines anyway. Should only be a few references of it.

- Trevor

Updates for Hijack v285. There is a mistake in the S/PDIF patch for v285. It's fixed in the compiled version below and I've sent Mark the fix.

Usual place here

FAT support kernel here
S/PDIF kernel here

- Trevor

FAT support for v291

Usual place here

FAT support kernel here

- Trevor