Posted by: SuperQ
loose docking connector - 24/08/2000 18:57
I noticed my docking connector on the back of the empeg unit was slightly loose, unscrewed by about 1mm.. is this normal? or am i just paranoid.
12gig green mk2 -- 080000125
Posted by: dtrounce
Re: loose docking connector - 24/08/2000 19:27
Same here.. my guess was that this was deliberate, to allow some flexibility in seating onto the car connection.
Posted by: tfabris
Re: loose docking connector - 24/08/2000 20:50
All full-pull-out stereos have that feature. Sometimes the wiggly part (technical term) is on the sleeve instead of the stereo.
___________
Tony Fabris
Posted by: Oscar
Re: loose docking connector - 13/09/2000 22:32
This might make another good addition to the FAQ. When I first unpacked my empeg I thought the connector had just come loose during shipping. I realized it was probably intentional after I tried to tighten the screws and found they were already fully tightened.