beta 2.0 problems

Posted by: jane

beta 2.0 problems - 18/10/2001 05:18

1) When I sync the first time, I get a lot of errors about invalid files when rebuilding the database. During this rebuild, the player reboots for every invalid file it seems. This is consistent, the same happens every time. I turn on logging, and the problem disappears, and everything is OK.
2) When booting the player, the serial port says
Vcb: 0x405ae000
E !! mp3_decoder.cpp 1052: Failed to seek to offset 2617671, error=0xc0044000
E !! mp3_decoder.cpp 1047: Failed to find valid sync after seeking to offset 2617671, error=0x0044000
3) When syncing, There is an error on "Writing player configuration", after this, I must restart emplode because it has the wrong cookie. Player config *is* changed (I tested by changing the player's name)
Synchronixze failed while writing player configuration. Connection timed out (error 0x8004003e) and the player reboots, I noticed... This also happens when synching over Serial cable.

Empeg Mark II 18GB, USB sync

I'll try ethernet later, and in the car to see if it actually plays music :-)


Marius

Edited by jane on 18/10/01 01:40 PM.

Posted by: tonyc

Re: beta 2.0 problems - 18/10/2001 05:29


2) When booting the player, the serial port says
Vcb: 0x405ae000
E !! mp3_decoder.cpp 1052: Failed to seek to offset 2617671, error=0xc0044000
E !! mp3_decoder.cpp 1047: Failed to find valid sync after seeking to offset 2617671, error=0x0044000


I've seen this one too.

-Tony
MkII #554
Posted by: jane

Re: beta 2.0 problems - 18/10/2001 05:31

It seems to say this every time now...

Marius (Escort Cab + Mark II)

Posted by: Taym

Re: beta 2.0 problems - 18/10/2001 06:30

Same thing here.

Taym
_________________________
MK II BLUE/RED 12GB #923 + RADIO
Posted by: fox

Re: beta 2.0 problems - 24/10/2001 13:37

same thing here to, after upgrade from 1.2 to 2.0b3
also with dev kernle, starting fsck by hand results in the same error message

Posted by: Bill Walker

Re: beta 2.0 problems - 27/10/2001 07:35

I just upgraded to 2.0B3 and have exactly the same problem. It won't pick up an IP VIA DHCP either.

Posted by: Amarth

Re: beta 2.0 problems - 04/11/2001 16:33

I see these same errors (2) when booting my Empeg (just upgraded first time to Developer image beta2.03 and watching the serial bootup screen..

Any word on this?