./smartctl -s on /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF ENABLE/DISABLE COMMANDS SECTION === SMART Enabled. empeg:/drive0/var/smartctl# ./smartctl -l error /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 8e 00 73 02 e0 59 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a8 8e 73 02 e0 c4 f4 02 32d+19:22:43.072 [RESERVED] Error -1 occurred at disk power-on lifetime: 5091 hours (212 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 04 8c 73 02 e0 Error: UNC at LBA = 0x0002738c = 160652 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 04 8c 73 02 e0 00 38d+05:30:52.667 READ MULTIPLE Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 03 11 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 8e 57 01 00 00 40 02 85 27d+13:48:16.371 [VENDOR SPECIFIC] 8e 00 00 00 00 00 02 00 27d+13:48:16.371 [VENDOR SPECIFIC] Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 59 00 00 00 03 11 00 at LBA = 0x00110300 = 1114880 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 c4 ef 43 01 00 00 e0 12d+10:16:17.668 READ VERIFY SECTOR(S) 00 00 00 00 00 00 00 00 00:00:35.844 NOP [Abort queued commands] Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 02 11 e0 59 00 00 03 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 02 e0 c4 4f 00 07 73 00:07:55.136 NOP [Reserved subcommand] 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Abort queued commands] empeg:/drive0/var/smartctl# ./smartctl -t short /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Short self-test routine immediately in off-line mode". Drive command "Execute SMART Short self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 2 minutes for test to complete. Test will complete after Fri Oct 5 21:38:33 2001 Use smartctl -X to abort test. empeg:/drive0/var/smartctl# ./smartctl -l selftest /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5098 - # 2 Extended offline Completed without error 00% 4635 - # 3 Short offline Completed without error 00% 4634 - empeg:/drive0/var/smartctl# ./smartctl -l error /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 8e 00 73 02 e0 59 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a8 8e 73 02 e0 c4 f4 02 32d+19:22:43.072 [RESERVED] Error -1 occurred at disk power-on lifetime: 5091 hours (212 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 04 8c 73 02 e0 Error: UNC at LBA = 0x0002738c = 160652 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 04 8c 73 02 e0 00 38d+05:30:52.667 READ MULTIPLE Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 03 11 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 8e 57 01 00 00 40 02 85 27d+13:48:16.371 [VENDOR SPECIFIC] 8e 00 00 00 00 00 02 00 27d+13:48:16.371 [VENDOR SPECIFIC] Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 59 00 00 00 03 11 00 at LBA = 0x00110300 = 1114880 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 c4 ef 43 01 00 00 e0 12d+10:16:17.668 READ VERIFY SECTOR(S) 00 00 00 00 00 00 00 00 00:00:35.844 NOP [Abort queued commands] Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 02 11 e0 59 00 00 03 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 02 e0 c4 4f 00 07 73 00:07:55.136 NOP [Reserved subcommand] 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Abort queued commands] empeg:/drive0/var/smartctl# ./smartctl -t long /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF OFFLINE IMMEDIATE AND SELF-TEST SECTION === Sending command: "Execute SMART Extended self-test routine immediately in off-line mode". Drive command "Execute SMART Extended self-test routine immediately in off-line mode" successful. Testing has begun. Please wait 55 minutes for test to complete. Test will complete after Fri Oct 5 22:34:44 2001 Use smartctl -X to abort test. empeg:/drive0/var/smartctl# ./smartctl -l selftest /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Self-test log structure revision number 1 Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error # 1 Short offline Completed without error 00% 5098 - # 2 Extended offline Completed without error 00% 4635 - # 3 Short offline Completed without error 00% 4634 - empeg:/drive0/var/smartctl# ./smartctl -l error /dev/hda smartctl version 5.33 [arm-empeg-linux-gnu] Copyright (C) 2002-4 Bruce Allen Home page is http://smartmontools.sourceforge.net/ === START OF READ SMART DATA SECTION === SMART Error Log Version: 1 Warning: ATA error count 0 inconsistent with error log pointer 2 ATA Error Count: 0 CR = Command Register [HEX] FR = Features Register [HEX] SC = Sector Count Register [HEX] SN = Sector Number Register [HEX] CL = Cylinder Low Register [HEX] CH = Cylinder High Register [HEX] DH = Device/Head Register [HEX] DC = Device Command Register [HEX] ER = Error register [HEX] ST = Status register [HEX] Powered_Up_Time is measured from power on, and printed as DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes, SS=sec, and sss=millisec. It "wraps" after 49.710 days. Error 0 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 8e 00 73 02 e0 59 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- a8 8e 73 02 e0 c4 f4 02 32d+19:22:43.072 [RESERVED] Error -1 occurred at disk power-on lifetime: 5091 hours (212 days + 3 hours) When the command that caused the error occurred, the device was active or idle. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 40 59 04 8c 73 02 e0 Error: UNC at LBA = 0x0002738c = 160652 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- c4 00 04 8c 73 02 e0 00 38d+05:30:52.667 READ MULTIPLE Error -2 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 00 00 03 11 00 00 00 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 8e 57 01 00 00 40 02 85 27d+13:48:16.371 [VENDOR SPECIFIC] 8e 00 00 00 00 00 02 00 27d+13:48:16.371 [VENDOR SPECIFIC] Error -3 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 59 00 00 00 03 11 00 at LBA = 0x00110300 = 1114880 Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 40 c4 ef 43 01 00 00 e0 12d+10:16:17.668 READ VERIFY SECTOR(S) 00 00 00 00 00 00 00 00 00:00:35.844 NOP [Abort queued commands] Error -4 occurred at disk power-on lifetime: 0 hours (0 days + 0 hours) When the command that caused the error occurred, the device was in an unknown state. After command completion occurred, registers were: ER ST SC SN CL CH DH -- -- -- -- -- -- -- 02 11 e0 59 00 00 03 Error: Commands leading to the command that caused the error were: CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name -- -- -- -- -- -- -- -- ---------------- -------------------- 00 02 e0 c4 4f 00 07 73 00:07:55.136 NOP [Reserved subcommand] 00 00 00 00 00 00 00 00 00:00:00.000 NOP [Abort queued commands] empeg:/drive0/var/smartctl# exit logout Shell exit Starting player Timezone: US/Pacific Hijack: intercepting config.ini player.cpp : 385:empeg-car 2.00 2003/04/01.