Posted by: DirtyDozen
The best way to solder/wire a custom remote?... - 23/12/2002 22:10
This is the set-up I'm having trouble with:
- I have 2 set's of button's. They consist of three buttons each.
- A "rocker" (Up/Down) and a center push.
- Each button requires two of the remote's contacts to meet eachother...
^ The contacts need to come from thows blue outlined circles
(That's 12 wires needed to be "extended" from the remote.)
I already figured out every set of connection's needed...
Except I dont realy know how they should be soldered.
Thats where I meet trouble...
Whats the best way this can be done, so the contacts will stay in place?
- DirtyDozen
- I have 2 set's of button's. They consist of three buttons each.
- A "rocker" (Up/Down) and a center push.
- Each button requires two of the remote's contacts to meet eachother...
^ The contacts need to come from thows blue outlined circles
(That's 12 wires needed to be "extended" from the remote.)
I already figured out every set of connection's needed...
Except I dont realy know how they should be soldered.
Thats where I meet trouble...
Whats the best way this can be done, so the contacts will stay in place?
- DirtyDozen