Light diffusion for the LED hack.

This is a link to the beginnings of my web-page that shows an idea on diffusing the LED light.
Diffusion
FYI since it's just starting some links might 404 on you. Let me know on improvements, flame me, or otherwise.

Ok had to change it again as either cuteftp or my ISP is crap, I've tested it several time hopefully I won't screw it up any more.

FYI since it's just starting most links will 404 on you.

The page itself seems to be 404ing for me...

Looks like you've got it as "photo.HTML" instead of "photo.html" as shown in your link.

How thick is that piece of foam?

I'm doing something similar with a thin piece of translucent white plastic (cut from some white vacu-formed packaging) and I had to fiddle around to keep that from interfering with the button-press operation.

I cut it down to 1cm thick.

And that fits under the fascia above the LED board without interfering with the knob press?

Changed it to photo.html sorry don't know why it renamed it with caps sorry. Link should work ok now i hate these web-page thingies confounded new technology.

Yeah works ok for me so far. Could be that it's soft enough to squish.