Posted by: bjoern
wireless, no go - plug cable into laptop, go? - 11/02/2004 01:16
I checked the FAQ and searched the forum. I couldn't find this problem described anywhere. Emplode can't seem to detect my empeg on my network if the laptop running emplode is connecting wirelessly. As soon as the network cable is plugged into the laptop, the empeg is detected. Do I need some specific setting? Other internet works just fine.
Posted by: matthew_k
Re: wireless, no go - plug cable into laptop, go? - 11/02/2004 01:39
Try specifying the IP address of the empeg manually. If that doesn't work, log into your router and make sure wired/wireless bridgeing is enabled.
Matthew
Posted by: bjoern
Re: wireless, no go - plug cable into laptop, go? - 11/02/2004 16:57
Specifying the IP number did it for me. Why wouldn't the broadcast work?
Posted by: mlord
Re: wireless, no go - plug cable into laptop, go? - 11/02/2004 17:05
Netmask.
If you can reconfigure your network to use 255.255.0.0 or 255.255.255.0 as the netmask, then the broadcast may work better. That's what worked for me.
Cheers