Remapping tel Mute

Posted by: Will

Remapping tel Mute - 04/03/2005 11:00

Hi there,
I want to remap the tel mute signal to switch it to the aux in...so that the sound come throught the speakers. I know that you can do it in hijack, I just cant find the thread that said how. Can anyone remember how to do it?
Anyway, I think I might have just broken a record for the bbs. I've been a member and regular viewer from it's inception and this is my first post!
Thanks in advance
Posted by: mlord

Re: Remapping tel Mute - 04/03/2005 14:19

[hijack]
extmute_on=button
extmute_off=button
Posted by: loren

Re: Remapping tel Mute - 04/03/2005 14:26

Mark beat me to it. Funny though. That's actually your 9th post, but your first one was also about phone mute, 4 years ago! =]
Posted by: tfabris

Re: Remapping tel Mute - 04/03/2005 14:43

Heh, but 4 years ago, I don't think Hijack existed, or at least it didn't have that feature.
Posted by: Will

Re: Remapping tel Mute - 04/03/2005 15:12

Hey, thanks for the prompt replies. Goes to show what my memory is like! I'll give it a go when I get home.
Loren, I've now got my empeg in the Scooby but the installers cocked it up, so I'm getting another fascia surround and going to re-do it
Posted by: SE_Sport_Driver

Re: Remapping tel Mute - 04/03/2005 15:14

Another facia surround ? ? Those are like 80 bucks! I hope you didn't have to pay for it!
Posted by: Will

Re: Remapping tel Mute - 04/03/2005 15:33

I have friends in important places...i.e. his Father owns the local Subaru dealership, so 'm hoping it won't be too bad.
Posted by: estocks

Re: Remapping tel Mute - 15/01/2006 19:52

Hello

I have two questions I hope you can answer; 1/ does the telephone mute require enabling as mine is not responding to a GND? and 2/ can the output of the mp3 audio be attenuated instead of muted?

Sw is v2.0 hijack (aging hijack)
Posted by: tfabris

Re: Remapping tel Mute - 15/01/2006 19:55

Yes, I think you control whether it's enabled by using the "Configure Player" screen in Emplode.
Posted by: matthew_k

Re: Remapping tel Mute - 15/01/2006 20:39

It can be attenuated, but as far as I know you're not going to get it to mix the mp3 sound under the aux in.

Matthew
Posted by: mlord

Re: Remapping tel Mute - 15/01/2006 21:53

Quote:
can the output of the mp3 audio be attenuated instead of muted?



You can map the mute high/low signals to do anything you want them to do via Hijack's button remapping. Somebody here has used this in the past. Try the "Search->Google" to look for that.

Cheers
Posted by: Shonky

Re: Remapping tel Mute - 16/01/2006 22:29

You basically gave the required info in the second post of this thread I think Mark.

Code:
[hijack]
extmute_on=Hush
extmute_off=Hush


should work I think however there is potential for it to get out of sync if the player isn't running when extmute goes active. Alternatively some kind of "Volume+, Volume+, Volume+, Volume+, Volume+" (and appropriate Volume- codes) sequence would work although it would suffer the same sync issues possibly.

As for actually getting the line to work, from memory it will default to the low/GND state i.e. applying GND won't do anything - you need to apply +12V to see anything. Have you seen this?