Posted by: gbeer
Rapid Prototype - 2.5" form for Addonics CF adaptor. - 27/06/2008 01:47
If you have access to a rapid-prototype machine the attached shell.stl file will let you build one of these 2.5" drive forms.
Attach the Addonics CF adaptor shown and this will fit your CF card neatly where ever a drive would have gone.
http://www.openrp.com/ << a viewer for STL files.
Attach the Addonics CF adaptor shown and this will fit your CF card neatly where ever a drive would have gone.
http://www.openrp.com/ << a viewer for STL files.