Custom Fascia's!

Ok gang, let's see how this goes over.
I'm going to start offering custom fascia's.

Right now they are only for the Mark 1's because I'm not sure if I can do this for the Mark II's yet (see below).
They will go for the same price as the tint lenses, $20 plus shipping.
If you use the tint lens in addition to the custom fascia which are 1/8 inch, they'll work great.
If you wish to use it over the original colored lens I have 1/16 inch material available for most of the materials I will offer.

I have made three out of different materials to show you what they look like. Brushed Aluminum, Brushed Gold and Walnut. They are attached to this and the next two posts.


I will also work out some other designs later and pricing if you wish to have a ''custom'' custom faceplate made.

I am going to try and set up a web page later tonight to list the different materials I'll have available (which is allot). If anyone out there can help with this I'd appreciate it (hint, hint).

Also, I'm still looking for a Mark II fascia, so if anyone out there has an extra one we can work something out ;)

Steve

Here's the Brushed Gold

And here's the Walnut.

Sounds good, but none of the Pics show up at this end ...

(list 6284, Mk1 S/N 00299 4GB blue [for sale]. Mk2 S/N 080000094 6GB blue)

.... 'cause you have a space in the file names!

(why can't I edit messages I have written??)

(list 6284, Mk1 S/N 00299 4GB blue [for sale]. Mk2 S/N 080000094 6GB blue)

'cos you're not logged in? Dunno, try PaulH or one of the other admins.

One of the few remaining Mk1 owners... #00015

Looks rude, i like. Are they all safe / non-dodgy etc?

OK, if I type the file name in by hand and replace the blank with %20 then I can look at the pretty pictures . Looks good. The Mk1 fascia will actually fit on a Mk2 if you drill a hole for the knob and swap the plastic buttons for Mk1 ones (they fit, and the empeg guys have a few left over. I believe you can also buy them from places like Farnell) there is a discussion about customising displays here. I would be interested in a custom front for my Mk2 as I much prefer the Mk1 blue.

Would there be any chance of you banging up a Mk1 style handle for the Mk2 if someone sent you a handle? This is the only thing that would look a bit strange with a custom front.

(list 6284, Mk1 S/N 00299 4GB blue [for sale]. Mk2 S/N 080000094 6GB blue)

If you can make an anodized blue one, I'll snap it up in a heartbeat! Would look great with my blue tinted mk1, I think!

I'd like to see 'chrome','hazard yellow' or 'white'?

#695empeg-car Mk2GRN& a mere 12Gig
"buyers regrets,NO"

Would there be any chance of you banging up a Mk1 style handle for the Mk2 if someone sent you a handle? This is the only thing that would look a bit strange with a custom front.

True, but replacing the handle is rather tricky, is it not? Taking it apart is apparently easier than fitting a new one, as I can remember, you've done it yourself! Maybe you should come up with some sort of install guide for this...

Edwin de Vaan
mk2 rev.7 Trillian # 080000263 6Gb blue/red