Hijack config error

Posted by: MisterBeefhead

Hijack config error - 04/06/2002 22:04

...is what it says every time I boot my Empeg. No problems that I have noticed, but the error message is annoying. I tried reinstalling 2.11b and Hijack to no avail. Is there something I'm missing?
Posted by: Shonky

Re: Hijack config error - 05/06/2002 01:07

You'll get that error if there's something funky in your config.ini file. Post it here so we can have a look if you want.

If you haven't enabled it in emplode the easiest way to get to it is probably via the http interface. I think it's in the /drive0/var dir from memory.
Posted by: tfabris

Re: Hijack config error - 05/06/2002 09:48

If you are having trouble with your config.ini file, please click here.
Posted by: MisterBeefhead

Re: Hijack config error - 05/06/2002 11:28

Thanks guys, it turned out to be the config.ini. 10,000 lines in the favorite visuals section.

Posted by: tfabris

Re: Hijack config error - 05/06/2002 11:57

Remember, to avoid this problem in the future, do not synch more than once during a given session of emplode. Always completely exit emplode after performing a synch in 2.0beta11.