Posted by: pedrohoon
Need help with HD upgrade please - 26/05/2008 07:00
Hello, I have replaced the original 10GB HD in one of my players with a Fujitsu 40GB HD (straight swap) but I was unable to get the disk builder upgrade to finish, it kept taking a long time to do the pump part, then finally came up with an error at stage 0x20.
So I followed Roger's instructions here to manually partition the drive, which appears to have worked.
After rebooting the player to follow the next stage instructions here, I can't seem to get past the pump prompt, and when I do hit Ctrl-A to get the pump> prompt, I can't do anything there, and the player display shows 'no HD found contact support'.
Can anyone help me get any further please?
Boot log is here:
(Sorry for the messy output, it is what shows up in hyperterm)
So I followed Roger's instructions here to manually partition the drive, which appears to have worked.
After rebooting the player to follow the next stage instructions here, I can't seem to get past the pump prompt, and when I do hit Ctrl-A to get the pump> prompt, I can't do anything there, and the player display shows 'no HD found contact support'.
Can anyone help me get any further please?
Boot log is here:
(Sorry for the messy output, it is what shows up in hyperterm)
Code:
empeg-car bootstrap v1.02 20001106 ([email protected])let them speak now, or If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux!heir peace...If there is anyone present who wants to upgrad e000 v1.04 Copying kernel... Linux version 2.2.14-rmk5-np17-empeg55 (peter@tatu) (gcc version 2.95.3 20010315eir peace...If there is anyone present who wants to upgrade th (release)) #20 Tue Jul 6 15:36:06 BST 2004 e flash, let them speak Processor: Intel StrongARM-1100 revision 11hold their peace...If there is anyone prese Checking for extra DRAM:h c1000000: wrote ffffffff, read 9afffff0 e flash, let them spe NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.re is anyone present who wants to upgrade th empeg-car player (hardware revision 9, serial number 30102663)let them speak now, or forever hol Command line: mem=16mre is anyone e flash, let Dentry hash table entries: 2048 (order 2, 16k)forever hold their peace...If there is anyone Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) or forever hold their peace...If there POSIX conformance testing by UNIFIXde th Linux NET4.0 for Linux 2.2 e Based upon Swansea University Computer Society NET3.039r forever hold their peace...If there is anyone present NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP e flash, let them s TCP: Hash tables configured (ehash 16384 bhash 16384)their peace...If there is anyone Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled or forever hold their peace...If there is anyone present who wa ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART or forever hold their peace...If there ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 206f6972 'rio 'ash, let them speak now, empeg display initialised. forever hold their peace. empeg dsp audio initialised or forever empeg usb initialised, PDIUSBD12 id 1012esent who wants to upgrade th empeg state support initialised 0089/88c1 (save to d0005c00). e flash, let them speak now, empeg RDS driver initialisedce...If there is anyone pres empeg single channel IDE Probing primary interface... hda: FUJITSU MHT2040AH, ATA DISK drive hda: FUJITSU MHT2040AH, ATA DISK drive hda: FUJITSU MHT2040AH, ATA DISK drive hda: FUJITSU MHT2040AH, ATA DISK drive hda: FUJITSU MHT2040AH, ATA DISK drive hda: FUJITSU MHT2040AH, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: FUJITSU MHT2040AH, 38154MB w/8192kB Cache, CHS=4864/255/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected]) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:26:0a:6 7 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump... pump>