Posted by: zimmy6996
TELNETD and FTPD howto - 15/07/2001 13:27
Well, this issue hasn't been addressed in a while, so I figured I'd give it another shot. Does ANYONE out there have a HOWTO, or some sort of documentation in getting the FTPD and TELNETD working on the Empeg?
Chris Zimmerman - #427
[email protected]MK.I - 00028
MK.II - 060000051
Posted by: Dava
Re: TELNETD and FTPD howto - 16/07/2001 02:00
I would like to second that request.
MK2 Red S/n 949
Posted by: dionysus
Re: TELNETD and FTPD howto - 16/07/2001 19:03
Posted by: Dava
Re: TELNETD and FTPD howto - 17/07/2001 08:35
I am having problems with the Debian root link on the first message. Where else can I get it from?
MK2 Red S/n 949
Posted by: BryanR
Re: TELNETD and FTPD howto - 18/07/2001 02:03
I got mine from Frank's website - it's been mentioned on this board before, but the URL is:
http://fvgestel.dyndns.org/empeg/debian/debian-image.990822.tar.gz
Cheers,
Bryan.
Mark 2 #080000515
Was 12GB Blue, now 42GB Green!
Posted by: Dava
Re: TELNETD and FTPD howto - 19/07/2001 06:11
OK, Thnaks.
Now it is half working. I can FTP in but not connect using telnet, when I use FTP I can't retrieve files (Error 550). I suppose that this is because the drives are not RWM but I can't RWM without telnet.
Any other perls of widom for me?
I am logging in using FTP as user and PWD.
Telnet connects and then the connection is dropped immediately before user and PWD are entered.
All I want to do is be able to edit files with Ultraedit's FTP option.
MK2 Red S/n 949
Posted by: warren
Re: TELNETD and FTPD howto - 21/07/2001 16:57
I have experienced some of the same problems.
I have managed to get FTP fully working though (you can rwm the drives using Hyperterminal or similar via the serial port, although I wouldn't have thought this would affect your ability to download via FTP). Download seems to work fine for me.
As far as telnet is concerned, I think the problem is that the debian image does not seem to contain "in.telnetd" which is what is being invoked in response to telnet connections (as specified in /etc/inetd.conf). Anyone know where one can get hold of this?
Warren.
Posted by: Terminator
Re: TELNETD and FTPD howto - 21/07/2001 18:53
I think you can get it off the debian website.
Sean
Posted by: dionysus
Re: TELNETD and FTPD howto - 24/07/2001 17:43
Right.. What I did (this is dangerous..) is make it so that my drives are in read/write mode when I hit the quit button on my empeg (I have to remember to R/O them manually..)
Telnet doens't wanna work w/o this.. People have found better workarounds though..
-mark
...Still (barely, pending 1.1 release) proud to have owned an Empeg since 00287