Posted by: jdk
Sled Connectors - 21/01/2002 13:12
Are these custom made or an off the shelf electrical connector?
Thanks.
Jim
Thanks.
Jim
Sled Connectors
Posted by: mtempsch
Re: Sled Connectors - 21/01/2002 13:41
They're off the shelf, but not all that easy to find/use. The crimping tool is $$$.
Some time ago I posted a link to a PDF that had the articel numbers for the various part (plastic parts, signal pins, power pins etc).
Here's the post
/Michael
Some time ago I posted a link to a PDF that had the articel numbers for the various part (plastic parts, signal pins, power pins etc).
Here's the post
/Michael
Posted by: Terminator
Re: Sled Connectors - 21/01/2002 13:44
Off the shelf. the wiring looms are custom wiring though. I don't remember the part number, but farnell stocks it (I think) Do a search on this board, and maybe the part number will turn up.
Sean
Sean
Posted by: tfabris
Re: Sled Connectors - 21/01/2002 13:57
The Mark1 connectors are off the shelf. But the Mark2 connectors are not off the shelf.
The Mark2 connectors are from a company that only does them in large quantities for high-dollar large-volume customers. So if you're just looking to buy a couple Mk2 connectors for your personal projects, you're not going to get very far.
The Mark2 connectors are from a company that only does them in large quantities for high-dollar large-volume customers. So if you're just looking to buy a couple Mk2 connectors for your personal projects, you're not going to get very far.