Posted by: Nosferatu
OBD - 19/07/2002 07:37
Can someone give the link to OBD standard please ...
In reply to:
3. Hope I'm not alone here because I have to learn programming the empeg from the scratch...
J1850 VPW--The connector should have metallic contacts in pins 2, 4, 5, and 16, but not 10.
ISO 9141-2--The connector should have metallic contacts in pins 4, 5, 7, 15, and 16.
J1850 PWM--The connector should have metallic contacts in pins 2, 4, 5, 10, and 16.
Pin 15 - ISO 9141-2 L LineSounds important, is it?