Posted by: smu
configuration issues - 26/08/2000 11:02
Hi.
Ok, first of all: I really support the wish to allow some basic configuration using the empeg itself, especially switching from dhcp to static IP (and of course configuring that IP). What is even more important is a little status info screen that shows things like:
And one more wish:
As far as I know (from the parts of this BBS I saw and from the documentation), the mute input is currently only configurable in two ways:
cu,
sven
Ok, first of all: I really support the wish to allow some basic configuration using the empeg itself, especially switching from dhcp to static IP (and of course configuring that IP). What is even more important is a little status info screen that shows things like:
- Temperature (AFAIK, the empeg monitors (some?) internal temperatures)
- USB connection status
- Ethernet connection status, including current IP and a hint (D/S) on wether that was configured statically or via dhcp
- current input voltage
And one more wish:
As far as I know (from the parts of this BBS I saw and from the documentation), the mute input is currently only configurable in two ways:
- Mute if pulled down to ground
- Mute if pulled up to 12V or something
cu,
sven