hda: FUJITSU MHM2200AT, ATA DISK drive
hda: FUJITSU MHM2200AT, ATA DISK drive
hda: FUJITSU MHM2200AT, ATA DISK drive
hda: FUJITSU MHM2200AT, ATA DISK drive
hda: FUJITSU MHM2200AT, ATA DISK drive
hda: FUJITSU MHM2200AT, ATA DISK drive
ide0 at 0x000-0x007,0x038 on irq 6
hda: FUJITSU MHM2200AT, 19077MB w/2048kB Cache, CHS=38760/16/63
empeg-flash driver initialized
smc chip id/revision 0x3349
smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected])

SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP MEM:6144b MAC 00:02:d7:28:0c:c
1
Partition check:
hda:hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hda: recal_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x04 { DriveStatusError }
hda: recal_intr: status=0x51 { DriveReady SeekComplete Error }
hda: recal_intr: error=0x04 { DriveStatusError }
hda: read_intr: status=0x59 { DriveReady SeekComplete DataRequest Error }
hda: read_intr: error=0x04 { DriveStatusError }


doesnt look to good
when booted the HD spins up then goes into this thing where is sounds like it keeps trying to spin up.
then I get a pump error when I try to upgrade.