Ok, I've got a bit of problem with my empeg (it's a mark II). I was syncing using ethernet, something I've done before with no problems, and when I came back the next morning, it still said it was syncing. My computer was locked, so I had to reboot it. When I unplugged the empeg and then plugged it back in, the Empeg would hang at the Building Databases part of the bootup process. This went on for about 30 seconds before I got nervous and turned it off. I could hear the hard drive thrashing about a touch. Anyway, I'm not sure what to do next. I'm running the latest beta of the player and emplode software. The batch of songs I was syncing was a larger one than I usually do, so that may have been the problem, but it was also the first time I've checked the box that says "Power down player after sync process is complete" (or words to that effect), so that might have affected it as well. Any advice to get my empeg back on it's feet again would be highly appreciated. And let me know if you need any other info that I might have neglected to include. Thanks.