I have already complained if inability to use emptool via serial line from my RH 5.2 to consumer 1.0 (emplode from NT works OK, as does terminal from both platforms).

I encountered another problem: I brought empeg to my client's office (I spend most my time there) and connected it to their network by unplugging a WinNT PC. They use DHCP, and I don't know much about their network configuration. Anyway, empeg started normally, but when I started emplode from another NT, empeg started rebooting (emplode did not find it). When I exited emplode or unplugged Ether from empeg, reboots stopped. The terminal showed that reboot happens around the time of player start. (BTW, I don't know what was between empeg and emplode-running NT: hub, auto-learning swithch etc, neither I know other configuration details - e.g. about their DHCP).

Any idea?

Thanks!

Dragi "Bonzi" Raos
Zagreb, Croatia
Q#5196, MkII#80000376, 18GB green