Hipped1 (and FAQmaster TFabris)
Thanks for the great, great tips. I tried all of them. I even, at his point, disabled the second ethernet NIC and am running (successfully) my cable broadband through a "cheap" 10baseT hub I have. I also enabled the empeg through this device (did I mention I love my empeg?). However...

Problems still exist. I can set the ARM software to Enable Autoconfiguration's IP using first address of :192.168.0.5 and second address of: 192.168.0.5 and even though the Receiver still fails to be recognized by the ARM software the "failure" IP address on the Receiver screen reads "info net:eth ip 192.168.0.2 255.255.255.240 g:24.136.179.XXX (g is my fixed cable IP address). At least the Rio receiving the IP address.

Sorry to be a pain but what next?... is this Receiver "baked"?


Sean in NC
510sRus

PS. Maybe I will sell this POS and make or buy another mlord home dock and carry my empeg around instead... hahaha
_________________________
_____________
Sean in NC
130gb MK2a w/ 32mb ram
80gb MK2a empeg spare