Since Mark brought it up here, I guess now is as good a time as any to mention my Mk2 is not recognizing the extra 4 MB Stu installed several months ago.

I honestly don't need the extra memory; I'm still running the original 10GB hard drive . But I recently installed emphatic and having some extra cache would be nice. The boot log and Ctrl-T memory diagnostic results are below, let me know what else is required.

Edit to add: running 2.00 final developer and Hijack v410.

Code:
If there is anyone present who wants to upgrade the flash, let them speak now,

hda: hda1 < hda5 hda6 > hda2 hda3 hda4

or forever hold their peace...it seems not. Let fly the Penguins of Linux!

RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.



e000 v1.04

Copying kernel...

Calling linux kernel...time reached, running e

Uncompressing Linux..................................... done, booting the kerne

VFS: Mounted root (ext2 filesystem).

em

l.-p

Linux version 2.2.17-rmk5-np17-empeg52-hijack-v410 ([email protected]) (gcc versioning to unmount old root ... okay

2.95.3 20010315 (release)) #2 We

NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.iserfs but got error 19

empeg-car player (hardware revision 7, serial number 90000980) 12MB DRAMd to mount /dev/hdc4 but got error 6

Command line: mem=12mrtitions (possibly al

Calibrating delay loop... 207.67 BogoMIPS

Remounting first

Memory: 10952k/12M available (984k code, 20k reserved, 328k data, 4k init)ting second music partition read-only

Dentry hash table entries: 2048 (order 2, 16k)

Press 'q' now to go into development mode

Buffer cache hash table entries: 16384 (order 4, 64k)

hijack: remove

Based upon Swansea University Computer Society NET3.039

khttpd: listening on

NET4: Linux TCP/IP 1.0 for NET4.0

kftpd: listening on port 21

IP Protocols: ICMP, UDP, TCPg non-standard cache size 74

TCP: Hash tables configured (ehash 16384 bhash 16384)

player.cpp        : 385:empeg-car 2.00 2

IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)

Prolux 4 empeg car - 2.1434 Mar

Starting kswapd v 1.5

SA1100 serial driver version 4.27 with no serial options enabled (priority -1)

e2fsc

ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART

ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UAR

empeg dsp audio initialised

Starting pl

empeg dsp mixer initialised: US/Pacific

empeg dsp initialisedting config.ini

empeg audio-in initialised, CS4231A revision a0che size 74 (adjustment 10)

empeg remote control/panel button initialised.  : 385:empeg-car 2.00 2003/04/01.

empeg usb initialised, PDIUSBD12 id 1012Prolux 4 empeg car - 2.1434 Mar 26 2003

empeg state support initialised 0089/88c1 (save to d0004680).

ÿIf there is anyone present who wants to upgrade the

empeg RDS driver initialised

empeg power-pic driver initialised (first boot)



Probing primary interface...

Calling linu

hda: IBM-DJSA-210, ATA DISK drive

Uncompressing Linux.............

hda: IBM-DJSA-210, ATA DISK driveting the kerne

hda: IBM-DJSA-210, ATA DISK drive

l.



hda: IBM-DJSA-210, ATA DISK driveeg52-hijack-v410 ([email protected])

hda: IBM-DJSA-210, ATA DISK drive

hda: IBM-DJSA-210, ATA DISK drive010315 (release)) #2 Wed Aug 4 00

ide0 at 0x000-0x007,0x038 on irq 6

hda: IBM-DJSA-210, 9590MB w/384kB Cache, CHS=19485/16/63

Checking for extra DRA

empeg-flash driver initialized0000: wrote ffffffff, read ef1

smc chip id/revision 0x3349

NetWinder

smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected]

RAMDISK: ext2 filesystem found at block 0served, 328k data, 4k init)

RAMDISK: Loading 320 blocks [1 disk] into ram disk... done.

Dentry hash table entries: 2048 (order 2, 16k)

EXT2-fs warning: checktime reached, running e2fsck is recommended: 16384 (order 4, 64k)

VFS: Mounted root (ext2 filesystem).ies: 4096 (order 2, 16k)

empeg-pump v0.03 (19980601)

Mounting proc

Mounting first music partition

Tried to mount /dev/hda4 as reiserfs but got error 19

Mounting second music partition

Tried to mount /dev/hdc4 but got error 6

Error mounting partitions (possibly already mounted)

Remounting first music partition read-only

Remounting second music partition read-only

No secondary hard disk

Press 'q' now to go into development mode. You Have Zero Seconds To ComðStarting

player

Timezone: US/Pacific

Hijack: intercepting config.ini



opening display...

hijack: removed menu entry: "Serial Port Assignment"

khttpd: listening on port 80

kftpd: listening on port 21

Using non-standard cache size 74 (adjustment 10)

emphatic v2.04 (built Aug 17 2004 21:05:49) running as pid 12

player.cpp        : 385:empeg-car 2.00 2003/04/01.

Prolux 4 empeg car - 2.1434 Mar 26 2003

Vcb: 0x404ad000


Also, here is the memory test diagnostic results:

Code:
empeg-car bootstrap v1.00 20000601 ([email protected])

Probing primary interface...

If there is anyone present who wants to upgrade the flash, let them speak now,

hda: IBM-DJSA-210, ATA DISK drive

0140 testing ic 4 (4-7mb, high word)

0150 testing ic 19 (8-11mb, low word)

0160 testing ic 32 (8-11mb, high word)

01f0 ram test done

0200 ide detect

0210 command issued

0220 drive id IBM-DJSA-210

02f0 ide ok

0300 dsp/i2c test

03f0 dsp/i2c ok

0400 temperature detect

0410 temperature is 38

04f0 temperature ok

0500 usb detect

0510 usb rev 1012

05f0 usb ok

0600 ethernet detect

0610 ethernet rev 334b

06f0 ethernet ok

0700 cs4231 detect

0710 cs4231 rev a0

07f0 cs4231 ok

00f0 tests complete