Hi all - got a dodgy MkII - wondered if you could help

It's coming up with the usual "No Hard disk found" message and, when I look at the serial port, it tells me it's looking for the primary drive, fails and the OS dumps. Okay, fine - nothing unusual there.

So, I've tried the cable and hard drive in my other Empeg and they're fine (poor taste in music, but the devices are fine ) I've now got the m/b out and there don't seem to be any lifted connections on the IDE header connector. BUT, there is one that's clearly broken. As you look over the screen, towards the back of the case, the back left connector is not joining with its little connector on the m/b.

Having looked underneath the m/b, I don't think that connection goes anywhere. But, since I don't have my small soldering iron handy enough to reflow all the joins right now, I thought I'd ask for comments from you guys, about the board and about that specific connector.

Any comments (other than go home and reflow the IDE connections) you can offer would be gratefully received

Richard