I made a Chrysler 1.5 DIN adapter from 1/8" steel plate and used the two bolt holes that held the factory radio. The bottom bolt gave me a bit of grief because it wanted to hit the cowling (or whatever that cover is). I spaced out the plate from the dash using nuts as spacers. The plate supports the empeg sled nicely (not like the plastic ones you get from Circuit City) and all I had to do was bend out the sled tabs to hold the sled in place. The plate and sled now comes out easily. All I have to do is pull the cowling off and undo two bolts. I painted the plate flat black and it looks factory, no gaps anywhere.