Working on the codes for the Pioneer remote, I need to install a compiler on my empeg. Using hyperterm and zmodem, I successfully loaded binutils, then tried to upload gcc. I'm repeatedly getting the error below. Any help on why?
Thanks,
Douglas

rz: memory violation at pc=0x40082b14, lr=0x40082b18 (bad address=0x0000
0029, code 2)
pc : [<40082b14>] lr : [<40082b18>]
sp : bffff968 ip : bffff968 fp : bffff998
r10: 4011c128 r9 : 0200d500 r8 : 00000000
r7 : 000000f0 r6 : ffffffff r5 : 00000000 r4 : 020200c0
r3 : 00000021 r2 : 00000000 r1 : 00000000 r0 : 020200c0
Flags: nzCv IRQs on FIQs on Mode USER_32 Segment user
Control: C038517D Table: C038517D DAC: 00000015
Function entered at [<40082a58>] from [<02004434>]
r10 = 00000000 r7 = 02017888 r6 = 02017A18 r5 = 4011AD90
r4 = 0200E2E0
Function entered at [<02003d4c>] from [<020038ec>]
r10 = BFFFFE18 r9 = 0200D500 r8 = 00000000 r7 = 02017888
r6 = 02017880 r5 = 00000000 r4 = 00000000
Function entered at [<02001ac4>] from [<40054040>]
r10 = 4011C128 r9 = 02001AC4 r8 = 0200CFB4 r7 = 02001334
r6 = 4000C2A8 r5 = 00000001 r4 = BFFFFE14
Function entered at [<40053ee4>] from [<02001920>]
r10 = 4001D858 r9 = 00000000 r8 = 00000000 r7 = 00000000
r6 = 020018FC r5 = 00000000 r4 = 4001E5EC
Segmentation fault
empeg:/dlm#