I was referring to the blue amp wire on the docking sled, which I *thought* the Rio Car manual said could be hooked up to control a power antenna as well as the amp turn-on. Currently, it is hooked up to control the amp turn-on ONLY.

Only the blue antenna control wire from the tuner module is hooked up to the antenna wire on the car's wiring harness.

1. I will check the blue antenna control wire from the tuner to make sure it's sending a 12-volt signal to the (presumed) antenna power amplifier.

2. The DSP setting is an interesting note. Is this user-changeable? It should be noted that:

maximum signal strength = excellent sound
loss of 1 bar = significantly diminshed volume
loss of 2 bars = further diminshed volume
loss of 3 bars = static, further diminished volume, unusable


Grant

Edited by ProtonVehiCROSS on 17/09/01 06:19 PM.