I posted this on the wish list and my wish was granted just yesterday, so I figured I'd move it on over here to programming.
Heres the background if your curious.

I've downloaded the kernel and with a little help have successfully set the number 9 and 10 EQ channels to the recommended settings.
Set the ninth band of each channel to have dB=0, f=100Hz, q=0.2 and the tenth band to have dB=0, f=10KHz, q=0.2

Now remember I'm totally ignorant so I'm probably going to make an ass of myself, but whatever...

The frequency settings I assume are for the bass and treble range adjustments, so If I wanted more or less bass from my increment changes in the bass slider in Hijack I could change that frequency to something else, right?
Bass is low frequencies so the 100hz setting on channel 9 is for the bass settings right?
If I did want to change it whats the theoretical maximum or minimum that I would use? 200hz? 50hz? And what about treble?
And on the same topic how did you (genixia) come up with your default recommendations?

I'm not really sure how all this works, I just know that it does and I'm thrilled.
I'll probably never change the recomended settings, but I'm still curious.

Thanks, again genixia!

Z~