Player hangs during emplode startup | Bug Reports | unofficial empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

You are not logged in. [Log In] empegbbs.com » Forums » empeg-car » Bug Reports » Player hangs during emplode startup

Topic Options

#86953 - 11/04/2002 23:10 Here's the error messages [Re: jmusick]
jmusick new poster Registered: 02/03/2002 Posts: 13	Should I delete the tags.cpp file? And if so could someone point me at the correct place on this bb to find out how to do so? Just got this player fairly recently. Thank you!! -J ********************** empeg-car bootstrap v1.02 20001106 ([email protected]) If there is anyone present who wants to upgrade the flash, let them speak now, or forever hold their peace...it seems not. Let fly the Penguins of Linux! e000 v1.04 Copying kernel... Calling linux kernel... Uncompressing Linux...................................... done, booting the kern el. Linux version 2.2.14-rmk5-np17-empeg50-hijack-v225 ([email protected]) (gcc ve rsion 2.95.3 20010315 (release)) #2 Sat Mar 2 09:22:29 EST Processor: Intel StrongARM-1100 revision 11 NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp. empeg-car player (hardware revision 9, serial number 40103876) Command line: mem=16m Calibrating delay loop... 207.67 BogoMIPS Memory: 14968k/16M available (1008k code, 20k reserved, 384k data, 4k init) Dentry hash table entries: 2048 (order 2, 16k) Buffer cache hash table entries: 16384 (order 4, 64k) Page cache hash table entries: 4096 (order 2, 16k) POSIX conformance testing by UNIFIX Linux NET4.0 for Linux 2.2 Based upon Swansea University Computer Society NET3.039 NET4: Linux TCP/IP 1.0 for NET4.0 IP Protocols: ICMP, UDP, TCP TCP: Hash tables configured (ehash 16384 bhash 16384) IrDA (tm) Protocols for Linux-2.2 (Dag Brattli) Linux-IrDA: IrCOMM protocol ( revision:Tue May 18 03:11:39 1999 ) ircomm_tty: virtual tty driver for IrCOMM ( revision:Wed May 26 00:49:11 1999 ) Starting kswapd v 1.5 SA1100 serial driver version 4.27 with no serial options enabled ttyS00 at 0xf8010000 (irq = 15) is a ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART Signature is 67706d65 'empg' Scheduling custom logo. empeg display initialised. empeg dsp audio initialised empeg dsp mixer initialised empeg dsp initialised empeg audio-in initialised, CS4231A revision a0 empeg remote control/panel button initialised. empeg usb initialised, PDIUSBD12 id 1012 empeg state support initialised 0089/88c1 (save to d0004480). empeg RDS driver initialised empeg power-pic driver initialised ( RAM disk driver initialized: 16 RAM disks of 4096K size empeg single channel IDE Probing primary interface... hda: FUJITSU MHL2300AT, ATA DISK drive hdb: FUJITSU MHL2300AT, ATA DISK drive ide0 at 0x000-0x007,0x038 on irq 6 hda: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63 hdb: FUJITSU MHL2300AT, 28615MB w/2048kB Cache, CHS=58140/16/63 empeg-flash driver initialized smc chip id/revision 0x3349 smc9194.c:v0.12 03/06/96 by Erik Stahlman ([email protected]) SMC9194: SMC91C94(r:9) at 0x4008000 IRQ:7 INTF:TP 4 Partition check: hda: hda1 < hda5 hda6 > hda2 hda3 hda4 hdb: hdb1 < hdb5 hdb6 > hdb2 hdb3 hdb4 RAMDISK: ext2 filesystem found at block 0 RAMDISK: Loading 320 blocks [1 disk] into ram disk... done. VFS: Mounted root (ext2 filesystem). empeg-pump v0.03 (19980601) Press Ctrl-A to enter pump...VFS: Mounted root (ext2 filesystem) readonly. change_root: old root has d_count=1 Trying to unmount old root ... okay Freeing unused kernel memory: 4k initempeg init 0.8 I see this is a developer image! Mounting proc Mounting first music partition Tried to mount /dev/hda4 as reiserfs but got error 19 Mounting second music partition Remounting first music partition read-only Remounting second music partition read-only Press 'q' now to go into development mode. You Have Zero Seconds To Comply... Starting player hijack: removed menu entry: "Home/Work Location" hijack: removed menu entry: "Hard Disk Detection" khttpd: listening on port 80 kftpd: listening on port 21 player.cpp : 385:empeg-car 2.00-beta11 2002/02/08. ! tags.cpp : 61:Failed to open tags (0xc0041002). hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9802 hda: status timeout: status=0xd0 hda: drive not ready for command ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9804 hda: status timeout: status=0xd0 hda: drive not ready for command ide0: reset: success Loading dancefile: "/empeg/lib/visuals/breakdance.raw" Loading dancefile: "/empeg/lib/visuals/stonkdance.raw" Loading dancefile: "/empeg/lib/visuals/princedance.raw" Prolux 4 empeg car - 2.1434 Feb 7 2002 Vcb: 0x4086d000 //************************************ // The above portion took longer than it normall had in the past // The following portion is when I attempted to start emplode // and synchronize. //************************************ Adding Swap: 16596k swap-space (priority -1) e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hda4 is mounted. e2fsck 1.19, 13-Jul-2000 for EXT2 FS 0.5b, 95/08/09 ext2fs_check_if_mount: No such file or directory while determining whether /dev/ hdc4 is mounted. hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9802 hda: status timeout: status=0xd0 hda: drive not ready for command ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9804 hda: status timeout: status=0xd0 hda: drive not ready for command ide0: reset: success ! playerdb.cpp : 182:Failed to build dynamic database (status=0xc004401a). Restored terminal settings Remounting first music partition read-only Remounting second music partition read-only Abnormal player termination Player received signal 11 Starting player player.cpp : 385:empeg-car 2.00-beta11 2002/02/08. ! tags.cpp : 61:Failed to open tags (0xc0041002). hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9802 hda: status timeout: status=0xd0 hda: drive not ready for command ide0: reset: success hda: irq timeout: status=0xd0 ide0: reset: success hda: irq timeout: status=0xd0 end_request: I/O error, dev 03:03 (hda), sector 9804 hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt hdb: lost interrupt //****************************** // And it just hangs here indefinitely here //********************************
Top

View All Topics

Entire topic
Subject	Posted by	Posted
Player hangs during emplode startup	jmusick	11/04/2002 22:37
Re: Player hangs during emplode startup	jmusick	11/04/2002 22:41
Here's the error messages	jmusick	11/04/2002 23:10
Re: Here's the error messages	peter	12/04/2002 02:28
Re: Here's the error messages	jmusick	12/04/2002 09:52
loose cable?	jmusick	13/04/2002 13:15
Re: loose cable?	BartDG	14/04/2002 03:39
Re: loose cable?	burdell1	29/04/2002 21:21