Since the entire docking connector was pulled, it will have pulled all the wires together meaning that if anything worked loose, it would probably be the connector on the board, rather than any individual wires going into it.

If you can't find the screw, let me know and I'll get a replacement to you.

Even if wires have pulled out, you'd be very unlucky for it to start smoking. If you want to open it up to check, please email me with your serial number and wait for me to confirm first so that your warranty stays valid.

In any case, since as far as I'm concerned, the screws were loose from the factory, any damage casued by the docking connector pulling out would be under warranty.