I'm hoping that some one else might have some ideas here. I am modifying my empeg with the Hijack Kernel and LEDs. I have the four LEDs behind the buttons working properly, dim right and everything. Now the trouble are the ones behind the know. Made the board, tested it on a power supply, works fine. Hook it up, works, but not with the dimmer. I've taken it apart a few times and back together to have the same results. Their aren't any shorts or soldier bridges, so I don't know what's up. Maybe after doing it soo many times I fried the Transistor from too much heat. I don't know. If it were fried I don't think it would get any voltage to light the LEDs. ANy other ideas? (Keep in mind I don't see any problems around the Transistor or the board), I'd appreciate it. Thanks again