Yes, that did help. The volume thingy works better, IMHO.
As for the "profile" type setting of the EQ, your statement would make sense. I will have to try that.

Thanks

Smoker_Man
#080000449 MkII - 36Gb Blue

Fluuuuuke, oh Fluuuuuuke.

Sorry, Hardware Wars flashback.

May the Farce be with you :-)

Bill B.
Mk.2 SN 080000183 - 38 GB / Green

when I was testing my custom init executable, it did output a lot of garbage which would result in a total lockup of the serial port. I had to shut down win2k, swith off the empeg, switch on the PC, start upload, then apply power.
Believe me, I rebooted several times. The upload failed when the player had finished it's boot-sequence connected to serial.

Frank van Gestel

Did nobody else notice the function keys on the MKII remote have switched? I tried to use the "cd" button to reset the funnel web visual when i noticed the were different. I think the "cd" button is now the AUX. Strange? guess I will have to get one of the new remotes when they come out :-)

-Doug
(Mk2-12G-Blue)

Ethernet sync seems to be faster too. I just got 8.5 hours for 15.8GB of uploads
= 540 KByte/second. I used to get about 330 KByte/second

I think the "cd" button is now the AUX.

Hmm. "Tape" still goes to Aux like it always did. But now the CD button toggles between Aux and MP3.

This is nice, as I'm sure it frees up another button on the new remote for something more important. But now we've lost the ability to reset the visuals with a single button.

Mike, are you reading this? We know that the reset-visuals-with-the-CD-button thing was just a coincidence and was never meant to be a feature. But we've grown to like it. Perhaps there's a way you could sneak that into another button somewhere?

___________
Tony Fabris

But now the CD button toggles between Aux and MP3.

This is nice, as I'm sure it frees up another button on the new remote for something more important. But now we've lost the ability to reset the visuals with a single button.

Ah. That's a bug. As you spotted, it's due to the fact that on the new remote, empeg/aux is a toggle. But we didn't mean to break the old remote's behaviour here.

We know that the reset-visuals-with-the-CD-button thing was just a coincidence and was never meant to be a feature. But we've grown to like it. Perhaps there's a way you could sneak that into another button somewhere?

Button real estate is very scarce. The entire development staff at empeg stood around and argued for hours before we could fit all the functions we wanted onto the new remote. But we'll have a look and see if there's somewhere we could squeeze it in. (Press-and-hold on the Visual button, perhaps.)

Peter