Unoffical empeg BBS

Quick Links: Empeg FAQ | RioCar.Org | Hijack | BigDisk Builder | jEmplode | emphatic
Repairs: Repairs

Topic Options
#98705 - 11/06/2002 15:04 Getting a 165mm speaker out of a ~130mm hole
snoopstah
enthusiast

Registered: 07/01/2002
Posts: 337
Loc: Squamish, BC
I'm attempting the impossible - to fit new rear speakers to my VW Polo 3 door. I've got the grills off, but the hole behind the grill is approximately 130mm diameter - much smaller than the 165mm diameter speaker I'm trying to get out (and the new one I'm trying to get in, so bending the speaker is not an option)

So it looks as if I'm going to have to remove the back panels - easy, you say, except in the new VW interior look, the panel goes all the way from the front of the B pillar into the boot! And there's no visible screws.

Has anyone got any ideas as to how I even *begin* to get the speakers changed, without taking it to a professional installer?

Many thanks,

A.
_________________________
Empeg Mk2a 128G with amber lit buttons kit - #30102490

PhotoVancouver | Squamish, BC Webcam | Personal Website

Top
#98706 - 11/06/2002 15:12 Re: Getting a 165mm speaker out of a ~130mm hole [Re: snoopstah]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31565
Loc: Seattle, WA
Crutchfield should be able to supply you with a "Master Sheet" for the vehicle which shows exactly how to remove all speakers, dash panels, etc. It's what they're best at. For some installations, those master sheets are worth their weight in gold.

Make sure that you actually CALL crutchfiled rather than just visiting their web site. Their telephone techs are the best.
_________________________
Tony Fabris

Top
#98707 - 11/06/2002 15:13 Re: Getting a 165mm speaker out of a ~130mm hole [Re: tfabris]
tfabris
carpal tunnel

Registered: 20/12/1999
Posts: 31565
Loc: Seattle, WA
Oh, not only that, but they can also sell you plug adapters which allow you to plug your aftermarket speakers into the car without cutting any of the car's factory wiring.
_________________________
Tony Fabris

Top
#98708 - 12/06/2002 00:23 Re: Getting a 165mm speaker out of a ~130mm hole [Re: tfabris]
snoopstah
enthusiast

Registered: 07/01/2002
Posts: 337
Loc: Squamish, BC
Crutchfield is a US-only company, isn't it? It's gonna be hard for me to pop in - the nearest one is probably in the region of 3000 miles from here

Also, the VW Polo isn't a vehicle sold in America, so I doubt they'd be able to help much

Thanks anyway,

A.
_________________________
Empeg Mk2a 128G with amber lit buttons kit - #30102490

PhotoVancouver | Squamish, BC Webcam | Personal Website

Top
#98709 - 12/06/2002 02:44 Re: Getting a 165mm speaker out of a ~130mm hole [Re: snoopstah]
thinfourth2
Pooh-Bah

Registered: 13/04/2001
Posts: 1742
Loc: The land of the pale blue peop...
Where the hell are you ?

Also what age is the polo so i can go have a talk to some one or have a look at one

Removing interior panals is not normally a gentle process it will involve lots of pulling and breaking noises but it will go back in.
_________________________
P.Allison fixer of big engines Mk2+Mk2a signed by God / Hacked by the Lord Aberdeen Scotland

Top
#98710 - 12/06/2002 04:51 Re: Getting a 165mm speaker out of a ~130mm hole [Re: thinfourth2]
snoopstah
enthusiast

Registered: 07/01/2002
Posts: 337
Loc: Squamish, BC
Sheffield, verging on Leamington Spa. It's the Mk5 Polo (2000-2001) - not the brand new ugly one, but the subtly revised update to the Mk4, with clear headlights outside and a completely revised interior.

Thanks for trying to help, guys!

A.
_________________________
Empeg Mk2a 128G with amber lit buttons kit - #30102490

PhotoVancouver | Squamish, BC Webcam | Personal Website

Top