Okay, I've searched through ALL the posts, FAW, etc. and have yet to resolve my situatuion. Here I am resorting to posting a new thread.

Prior to version 1.03, I used the ehternet conenction via my office network to transfer my mp3's to my Empeg with ease. It's been several months and a new version of the firmware later, and now I can't seem to get it working again. :/

All of our office workstations connect to the network via DHCP, and are on the same subnet. When watching the bootstrap via Hyperterminal I get :

3b5714f9 DHCP Our mac is 00:02:d7:10:01:79
3b5714f9 DHCP Our address is 255.255.255.255
3b5714f9 DHCP Broadcast address is 255.255.255.255
3b5714f9 DHCP Current IP address is 255.255.255.255
3b5714f9 DHCP Sending DHCP discover
3b5714fa DHCP Sending DHCP discover
3b5714fc DHCP Sending DHCP discover
3b571500 DHCP Sending DHCP discover
3b571507 DHCP Sending DHCP discover
3b571516 DHCP Sending DHCP discover
3b571534 DHCP Sending DHCP discover
3b571570 DHCP Sending DHCP discover
3b5715e8 DHCP Sending DHCP discover
3b571660 DHCP Sending DHCP discover

...basically searching for the DHCP connection forever, and Emplode is obviously unable to find the Empeg on the network... Since our entire network is run via DHCP, using a static IP for the Empeg is a bit out of the question. I've never had to alter any of the network config files within linux before to get it to work, and am at a complete loss as to what I need to do now.

...Eagerly awaiting any help. :)


-chris
icq 7634211