OK, Here's one for you network wiring gurus:

Have DSl modem, router and Hub
Plug dsl modem in get signal hook up to computer IT WORKS

Next step, check out uplink to multi port hub use straight thru cable switch hub to straight thru no go swithc to crossover, voila it works...!!!
All ready for Whole house wiring....the fun starts
Wire up various rooms 568B style. Did a check caus Im not using a path panel at the hmodem/router/hub site (just plugs)

Test wire works good (basically a plug wired into a leviton 568 jack with 568B configuration. Wiring scheme seems sound. Run wires cut jacks into walls all is good...
Plug in first network connection....Houston, we have a problem... blinking connection light on hub, no network detected on computer end....recheck wiring and all seems ok, cut off plug and rewire check continuity OK still no go...

Hmmmmmmm Any Ideas? Probablysomething so stupid but I am new to netwoks and wiring and want a whole house network...

Please don't say go wireless, I live in the vicinity of Mt Sutro with the largest antenna and it wipes out all radio transmission (even car alarms don't work up here!)