Hi there...

I've just finished upgrading my player to 2.0 Beta 13, and
Hijack 283.. and all is fine ... except..

i've now reinstalled preinit v3 on my player in order to start empacman on startup,
and although it all seems work ok, a memory violation error
occours when starting empacman as follows..

hijack(9): memory violation at pc=0x02004480, lr=0x02004428 (bad address=0x464c4
587, code 2)
pc : [<02004480>] lr : [<02004428>]
sp : bffffe78 ip : bffffe98 fp : bffffe94
r10: 020005a4 r9 : 00000000 r8 : 0202eef0
r7 : 0203fdd0 r6 : 464c457f r5 : 0203fdc0 r4 : 00000010
r3 : 00001049 r2 : 00000010 r1 : 00001048 r0 : 464c457f
Flags: nZCv IRQs on FIQs on Mode USER_32 Segment user
Control: C0F3D17D Table: C0F3D17D DAC: 00000015
Function entered at [<02004458>] from [<02004428>]
r7 = 00000000 r6 = 020000C0 r5 = 0203FDC0 r4 = 464C457F
Function entered at [<02004380>] from [<020008ac>]
r5 = BFFFFF74 r4 = 00000001
Function entered at [<020005a4>] from [<02000a50>]
Function entered at [<02000974>] from [<02000104>]
r10 = 00000000 r8 = 00000000 r7 = 00000000 r6 = 00000000
r5 = 00000000 r4 = 00000000
empacman running as pid 15
Prolux 4 empeg car - 2.1434 Jul 24 2002
Vcb: 0x4086d000
! mp3_decoder.cpp :1049:Failed to find valid sync after seeking to offset 3450
288, error=0xc0044000

Any ideas? Is preint v3 not compatable with Hijack v283?


P.S.
Thanks for the empeg update guys.. always nice to have
support for an EOL product!