Unfortunately, I don't know anything about ME. Someone will have to fill you in there, or you can search around for TCP/IP setting in control panels and such.

You'll need to set your empeg's IP address to one address and your computer to something similar. Assuming you have no other ethernet, good choices would be 192.168.0.1 and 192.168.0.2. It'll also ask you for a netmask. Set it to 255.255.255.0 in both cases.

Once you have that set up, start emplode. In the ``Select Player'' dialog, click the options button and make sure that ``Network Broadcast'' is enabled. Then click OK to get back to the select dialog. You might have to exit and restart emplode for it to start searching again, but you should see it pretty much straightaway.