I am pretty sure I have an error in my tuner kit assembly. Do we not get a schematic due to non-disclosure issues? It would help for troubleshooting. I have hooked it up to the empeg and I get VERY FAINT audio on both AM and FM. actually only a few stations produce anything audible. They all show very high signal strength. Additionally IQ with only power and ground applied to the tuner unit is 130mA which seems high.

Any advice in tracking down the problem is apreciated. If I knew what the SPDT (the maxim chip) was used for I might lean towards it as I accidentally soldered it in wrong once and had to remove and replace it once.

HELP...

Thanks,
Eric Fesler (BSEE but too sloppy to be a good technician)