That worked but the RIO is still stalling at the boot logo.

Here is the output from HyperTerminal:

empeg-car bootstrap v1.02 20001106 ([email protected])
TCP: Hash tables configured (ehash 16384
If there is anyone present who wants to upgrade the flash, let them speak now,tocols for Linux-2.2 (Dag Brattli)
or forever hold their peace...it seems not. Let fly the Penguins of Linux!
ircomm_tty: vi

e000 v1.04iver for I
Copying kernel...ed May 26 00:49:1
Calling linux kernel...
Uncompressing Linux.....................................v 1.5

ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
Processor: Intel StrongARM-1100 revision 11
ttyS02 at 0xf8030000 (irq = 16) is a S
NetWinder Floating Point Emulator V0.94.1 (c) 1998 Corel Computer Corp.636f6972 'rioc'
Scheduling custom logo.
empeg-car player (hardware revision 9, serial number 10101551)
empeg dsp audio initialised
Command line: mem=16mtialised
Calibrating delay loop... 207.67 BogoMIPS
Linux NET4.0 for Linux 2.2
Based upon Swansea University Computer Society NET3.039
NET4: Linux TCP/IP 1.0 for NET4.0
IP Protocols: ICMP, UDP, TCP
TCP: Hash tables configured (ehash 16384 bhash 16384)
IrDA (tm) Protocols for Linux-2.2 (Dag Brattli)
Starting kswapd v 1.5
SA1100 serial driver version 4.27 with no serial options enabled
ttyS00 at 0xf8010000 (irq = 15) is a SA1100 UART
ttyS01 at 0xf8050000 (irq = 17) is a SA1100 UART
ttyS02 at 0xf8030000 (irq = 16) is a SA1100 UART
Signature is 636f6972 'rioc'
Found custom animation at offset 0x9b790
Tuner: loopback=0, ID=-1
Scheduling custom logo.
empeg display initialised.
empeg dsp audio initialised
empeg dsp mixer initialised
empeg dsp initialised
Could not find CS4231A (version=c7)
empeg audio-in initialised, CS4231A revision c7
empeg remote control/panel button initialised.
empeg usb initialised, PDIUSBD12 id dfdf