Hijack already has code to map non-standard stalk values to the standard codes (which can then be remapped with ir_translate if need be).

The "stalk_lhs" and "stalk_rhs" arrays are used in config.ini to specify the min/max readings for each of the 10 possible stalk buttons/motions on the standard unit.

The "stalk_debug=1" parameter can be used to dump raw stalk packets out the serial port -- the stalk reading is the third byte of each packet.

BUT.. Just for Roger, I'm spinning a v354 right now, which integrates the raw stalk codes onto the front panel "Button Codes Display" function from the Hijack menu.. much more convenient for in-car use, that way.

Should be ready in 5-10 minutes.

Cheers