My CB radio in my Jeep has a 4 Watt mono speaker output. I was wondering if the Empeg's AUX input could handle a 4 Watt input?

No, but you can get some speaker-level to line-level converters from Crutchfield that'll do the job for you.

This is a good application for mixing the Empeg output with the AUX input. I don't know if the DSP can do that or not.

Even if the DSP couldn't do it, I'll bet that it could be done in software. There's a limit to the sampling frequency, but it could theoretically sound decent with the sounds from the CB radio output. I wouldn't hold my breath on Empeg writing such a mod, though.

Then again, now that I think about it, voice-response navigation systems could benefit from such an Aux-Mix as well, so maybe the idea isn't really that farfetched.

Another option is to mix the two signals (CB and Empeg) using a line-level mixer, then send that result directly to the amplifier. That would work immediately and wouldn't require any work on Empeg's part. Does anyone know if there are line-level mixers like that designed for car applications? Or perhaps there's just a simple way to combine the two sets of signals without using a mixer?

___________
Tony Fabris
_________________________
Tony Fabris